Framtagning av loktågsmodell för VTI:s tågsimulator


Allowing higher speeds for freight trains would provide opportunities for a higher prioritization in the traffic flow by rail traffic management, which in itself is a capacity gain and should generate better flows and higher capacity on the Swedish rail network, especially on the major railways. Simulators are an effective and safe way to investigate the effects of changes in both driver behavior and capacity.

The purpose of this project was to create capacity-enhancing opportunities and actions by developing a freight train simulator and investigating its possible application areas. The aim of the project was to provide a freight train simulator, consisting of a locomotive and a number of wagons, which can be used in studies to increase capacity through, for example, optimized speed, and thus changing braking profiles, for long trains. The project has delivered knowledge of new test methods, a freight train simulator and a software platform for further testing.

The project was conducted in three successive stages. In the first phase, a pilot study was carried out with drivers, operators and problem owners, who gave the researchers an understanding of the driving environment. In addition, some of the data needed for the development of the freight train simulator was collected. In the second phase, a freight train (software and hardware) model was developed. Stage three was a validation study together with drivers.

A Traxx model driver console was purchased from a German manufacturer. The vehicle model was developed from a single unit, Regina type (motorcar train), into a combination of several units. The train in the simulator consists of one or more locomotives and a number of wagons with a total length of up to 750 meters. A locomotive of Traxx model is used. For each device, locomotive and wagon, data is required: length, weight, load, brake, roll and air resistance. In addition, information about noise, driving, braking (re-electrical braking and conventional pneumatic brake) (P-brake), cab equipment and more are added. Currently, the track between Falköping - Jönköping - Forserum is modelled and will be used for ATC trains. The model is configurable using combinations of a locomotive (Traxx) and, currently, four different types of wagons. These can be linked in different combinations.

Some applications that were discussed at the start of the project were, on the one side, those that could naturally be linked to longer and heavier trains, and, on the other, the ideas that arose because of the equipment purchased. At the Transport Administration winter meeting, a workshop was conducted where further uses were discussed. Among these are applications within education, energy efficient driving or design. Education and certain types of studies could be performed with the existing locomotive model, while others require either validation of parameters or some further development of the model.

The project has provided knowledge of new test methods, this research report and a product in the form of a freight train simulator and software platform for further testing. The project has also delivered a national resource of simulator software. The software provides for cost-effective testing activities in the freight train domain. A freight train simulator has been developed, which will be valuable as a demonstration tool as well as a platform for training,



Cost Benefit Analysis (CBA) workshop in Stockholm

An open seminar and workshop in Stockholm will be held on 25-26 April 2018. The workshop deals with the use of CBA as a basis for decision-making in the public sector. The workshop is organized by, among others, Professor Jan-Eric Nilsson, VTI.



Ulf Sandberg has been presented with the TTI Lifetime Achievement Award 2018

VTI’s Senior Research Leader Ulf Sandberg has been presented with the TTI Lifetime Achievement Award 2018 for his work on research into tyres and road surface.


Steps need to be taken to increase traffic safety of automated cars

Several steps are necessary to ensure that automated and connected cars will lead to increased traffic safety – everything from ensuring that technology takes vulnerable road users into account, to new forms of driver training. This has emerged in a position...


FALCON examines challenges in the transport sector

VTI is one of several important partners in the major FALCON project*, whose purpose is to create knowledge and insight regarding the transport sector. In an initial subproject, VTI has produced a manual on transport, logistics and multimodality.


VTI joined research cooperation in China

In December 2017 VTI became a member of China-Sweden Research Centre for Traffic Safety (CTS).


Swedish German research collaboration on Electric Road Systems

The project “Swedish-German research collaboration on Electric Road Systems” (CollERS) has now officially started. The goal of the project is to increase the common knowledge around Electric Road Systems by cooperation between Germany and Sweden and to...


Electric Road Systems Conference 2018

After a successful first conference in June 2017, the Swedish research and innovation platform for electric roads is arranging the second dedicated International Conference on Electric Road Systems (ERS) June 13th and 14th 2018.